# CP.XI.A — Confined Area Operations — Commercial Pilot Powered Lift ACS

> CP.XI.A from FAA-S-ACS-2, including the official objective, references, notes, and 36 exact knowledge, risk-management, and skill descriptions.

Canonical HTML: [https://www.check-ride.ai/acs/powered-lift/commercial-pilot/cp-xi-a](https://www.check-ride.ai/acs/powered-lift/commercial-pilot/cp-xi-a)

Site reference: [https://www.check-ride.ai/llms.txt](https://www.check-ride.ai/llms.txt)

## Official Task context

- FAA document: Commercial Pilot for Powered-Lift Category Airman Certification Standards
- Identifier: FAA-S-ACS-2
- Published source date: November 2023
- Aircraft category: Powered Lift
- Certificate or rating: Commercial Pilot
- Area of Operation: Area of Operation XI. Special Operations
- Task: Task A. Confined Area Operations
- Task code prefix: CP.XI.A
- Official references: FAA-H-8083-2, FAA-H-8083-25; Flight Manual
- FAA source library: https://www.faa.gov/training_testing/testing/acs

## Official Task objective

To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with confined area operations.

## Knowledge elements

- **CP.XI.A.K1** — Effects of wind, weight, temperature, and density altitude.
- **CP.XI.A.K2** — Situations when a confined area approach and landing is recommended and factors related to landing performance including H/V diagram information.
- **CP.XI.A.K3** — High and low reconnaissance, including takeoff and departure planning.
- **CP.XI.A.K4** — Power requirements versus power available for the departure or arrival profile(s).

## Risk management elements

- **CP.XI.A.R1** — Selection of approach path, termination point and departure path based on aircraft performance and limitations, wind, and availability of alternate sites.
- **CP.XI.A.R2** — Effects of:
- **CP.XI.A.R2a** — a. Wind Direction
- **CP.XI.A.R2b** — b. Windshear
- **CP.XI.A.R2c** — c. Turbulence
- **CP.XI.A.R3** — H/V diagram information.
- **CP.XI.A.R4** — Go-around.
- **CP.XI.A.R5** — Forced landing during the maneuver.
- **CP.XI.A.R6** — Landing surface.
- **CP.XI.A.R7** — Dynamic rollover.
- **CP.XI.A.R8** — Ground resonance.
- **CP.XI.A.R9** — Collision hazards.
- **CP.XI.A.R10** — Vortex ring state (VRS).
- **CP.XI.A.R11** — Aircraft limitations.
- **CP.XI.A.R12** — Low altitude maneuvering.
- **CP.XI.A.R13** — Distractions, task prioritization, loss of situational awareness, or disorientation.
- **CP.XI.A.R14** — Power requirements versus power available for the departure or arrival profile(s).

## Skills elements

- **CP.XI.A.S1** — Complete the appropriate checklist(s).
- **CP.XI.A.S2** — Make radio calls as appropriate.
- **CP.XI.A.S3** — Confirm power available meets or exceeds the power required for the selected departure or arrival profile(s).
- **CP.XI.A.S4** — Determine wind direction with or without visible wind direction indicators.
- **CP.XI.A.S5** — Accomplish a proper high and low reconnaissance of the confined landing area.
- **CP.XI.A.S6** — Select a suitable approach path, termination point, and departure path.
- **CP.XI.A.S7** — Track the selected approach path at an acceptable approach angle and rate of closure to the termination point.
- **CP.XI.A.S8** — Continually evaluate the suitability of the confined landing area and termination point.
- **CP.XI.A.S9** — Maintain powerplant and thrust output within normal limits.
- **CP.XI.A.S10** — Execute a timely go-around if the approach cannot be made within the tolerances specified above or for any other condition that may result in an unsafe approach or landing.
- **CP.XI.A.S11** — Accomplish a proper ground reconnaissance.
- **CP.XI.A.S12** — Terminate in a hover or on the surface, as appropriate.
- **CP.XI.A.S13** — Use runway incursion avoidance procedures, if applicable.
- **CP.XI.A.S14** — Conduct a takeoff and departure using the appropriate technique and aircraft configuration.
- **CP.XI.A.S15** — Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.

## Difficulty methodology

Difficulty calibration is ongoing for this Task. Observed difficulty is a privacy-thresholded check-ride.ai mock-oral practice proxy, not an FAA practical-test pass or fail rate. Underlying sample sizes and the private reporting threshold are not published.

## Official Task notes

- Commercial Pilot for Powered-Lift Category ACS (FAA-S-ACS-2) 56
- Area of Operation XI. Special Operations

## Use in practice

A mock examiner can ask a pilot to explain the published elements, apply them to the configured aircraft and airport context, identify risks, and defend a decision. Practice prompts are not represented as actual FAA examiner scripts or predictions of the questions a candidate will receive.